500-0771-01-ND

General Description Lepton® with Radiometry is a complete longwave infrared (LWIR) camera module designed to interface easily into native mobile-device interfaces and other consumer electronics. It captures infrared radiation input in its nominal response wavelength band (from 8 to 14 microns) and outputs a uniform thermal image with radiometry to provide temperature image with measurements. 

Features

 Integral shutter configuration: 11.5 x 12.7 x 6.9 mm (without socket) 11.8 x 12.7 x 7.2 mm (with socket)

 50° HFOV, 60° diagonal (f/1.1 silicon doublet)

 LWIR sensor, wavelength 8 to 14 µm

 80 (h) × 60 (v) active pixels

 Thermal sensitivity <50 mK

 Integrated digital thermal image processing functions, including automatic thermal environment compensation, noise filters, nonuniformity correction, and gain control

 Radiometric accuracy (35°C blackbody) greater of: o High gain: ±5C @ 25°C o Low gain ±10C @ 25°C

 Radiometry software features for temperature measurement including per pixel and frame radiometric output (T ) and spotmeter  Export compliant frame rate (< 9 Hz)

 SPI video interface

 Two-wire I2C serial control interface

 Uses standard cell-phone-compatible power supplies: 2.8 V to sensor, 1.2 V to digital core, and flexible IO from 2.8 V to 3.1 V

 Fast time to image (< 1.2 sec)

 Low operating power, nominally 150 mW to 160 mW over full temperature range)

 Low power shutdown mode (nominally 5 mW

 RoHS compliant

 32- pin socket interface to standard Molex or similar side-contact connector

Applications

 Mobile phones

 Gesture recognition

 Building automation

 Thermal imaging

 Night vision