micro:bit 雛形開發系統
貨號 114991413
售價 751.29 (未稅)
含營業稅 788.85元
廠商庫存 0
原始網址: https://www.seeedstudio.com/Prototyping-system-for-the-micro%3Abit-p-2997.html
描述
micro：bit 的原型系統是開始製作電路和進行實驗的好方法。這可以訪問 micro：bit 底部的引腳。
請注意： micro：bit 不包括在內。
該原型系統使用專門設計的用於 micro：bit 的邊緣連接器分線板。 micro：bit 引腳被分解為一排可焊接的焊盤。 SCL 和 SDA 引腳在電路板的邊緣分開，便於識別。 PCB 包括一個 3V，0V 的原型區域和可以焊接的不連接的行。這可以根據需要輕鬆連接開關，傳感器和任何上拉或下拉電阻等。
該原型系統與一個小型原型麵包板結合使用。這使得使用附帶的跳線來連接附加組件變得很容易。無需焊接。
注意： 該套件需要組裝。
特徵：
-
不需要焊接
-
使用 micro：bit 的預製邊緣連接器接口板，從 micro：bit 斷開 21 個引腳
-
包含小型原型麵包板，以便您可以使用其他組件
-
從您的 micro：bit 運行您自己的自定義代碼以與外部組件進行交互
技術細節
| 外形尺寸 | 160mm x 95mm x 35mm |
| 重量 | GW 140g NW 138g |
| 電池 | 排除 |
零件清單
| 小型原型麵包板 | 1 |
| 跳線男性對男性 | 10 |
| 跳線男性對女性 | 10 |
| 有機玻璃安裝板 | 1 |
| 微型邊緣連接器分線板：預製 | 1 |
Description
This prototyping system for the micro:bit is a great way to start making circuits and making experiments. This gives access to the pins on the bottom of the micro:bit.
Please note: micro:bit is NOT included.
This prototyping system uses the specially designed edge connector breakout board for micro:bit. The micro:bit pins are broken out to a row of solderable pads. The SCL and SDA pins are separated at the edge of the board providing easy identification. The PCB includes a prototyping area with 3V, 0V and unconnected rows that can be soldered to. This allows easy connection of switches, sensors and any pull-up or pull-down resistors etc. as required.
This prototyping system is used in conjunction with a small prototype breadboard. This makes it easy to connect additional components using the included jumper wires. No soldering required.
Note: This kit requires assembly.
Features:
No soldering is required
Breaks out 21 pins from the micro:bit using the pre-built edge connector breakout board for micro:bit
Small prototype breadboard included so you can use additional components
Run your own custom code from your micro:bit to interact with external components
Technical Details
| Dimensions | 160mm x 95mm x 35mm |
| Weight | G.W 140g N.W 138g |
| Battery | Exclude |
Part List
| small prototype breadboard | 1 |
| jumper wires male to male | 10 |
| jumper wires male to female | 10 |
| Perspex mounting plate | 1 |
| edge connector breakout board for micro:bit - pre-built | 1 |