新網站功能測試中,非最終報價且無法下單,敬請見諒!

Pimoroni 心情燈 - Pi Zero W 項目套件

Pimoroni Mood Light - Pi Zero W Project Kit, internet-connected

貨號 114991410
售價 1,595.88 (未稅)
含營業稅 1,675.67
廠商庫存 29

原始網址: https://www.seeedstudio.com/Pimoroni-Mood-Light---Pi-Zero-W-Project-Kit%2C-internet-connected-p-2985.html

描述

一個美麗的現代心情燈,在你的床頭櫃,書櫃或書桌上看起來很棒,而且它是互聯網連接的!

 

我們的心情燈套件擁有一切*你需要建立一個時尚的光線,喚起真正的吊燈,並使用我們的 Unicorn pHAT 板與 32 可編程 RGB Neopixel LED。將它設置為單色,讓它淡入彩虹的所有顏色,或利用 Pi Zero W 上的內置無線局域網。組裝所有內容大概需要 30 分鐘**(請查看我們的組裝指南了解詳情)。

 

Mood Light 使用我們廣受歡迎的 Unicorn pHAT 板,配備 32 個可編程 RGB Neopixel LED,為您提供充滿彩色可能性的真正彩虹。該支架巧妙地將 Pi Zero W 和 Unicorn pHAT 安裝在正確的角度,將光線通過懸吊式燈光開關投射出去,並將其美麗地擴散。

 

Pi Zero W 內置的無線局域網帶來了豐富的機會:將其連接到您的 Twitter 供稿,並跟踪您最近的推文的心情,或者在您將日常日落 / 您喜愛的天氣服務器的日出時間。

 

注意   這是一個焊接項目。

 

特徵

  • 8x4 可編程 RGB Neopixel LED 矩陣

  • 3 層白色和黃色吊燈支架和擴散器

  • Pi Zero W 採用單核 CPU 和內置無線局域網和藍牙

  • 適配器套件

  • 50 厘米 USB A 至 micro-B 線(從現有充電器或電腦為您的 Pi 供電)

  • Python 庫

  • 女性和男性的標題需要焊接

 

技術細節

外形尺寸 145 毫米 x 90 毫米 x 40 毫米
重量 GW 290g
電池 排除

零件清單

清除磨砂前層 1
黃色燈具配件插入 1
白色中間層 1
白色後面層 1
白腿固定器 2
附有橡膠腳的白色腿 2
M3 白色尼龍螺栓和螺母 6
M2.5 白色尼龍螺栓和螺母 4
Pi Zero W 1
獨角獸 pHAT 與 32 個可編程 RGB Neopixel LED 1
男性和女性 2x20 針頭 1
白色和黃色吊燈支架和擴散器 1
50 厘米 USB A 到 micro-B 電纜 1
USB A(母)到微 B(公)適配器 1
迷你全尺寸 HDMI 適配器 1
貼紙(個性化您的心情燈!) 1
進入可重複使用的套件箱 1

學習

  • Unicorn pHAT 入門

    了解如何安裝並開始使用 Unicorn pHAT

Description

A beautifully modern Mood Light that'll look great on your bedside table, bookcase, or desk, and it's internet-connected!


Our Mood Light Kit has everything* you'll need to build a sleek looking light that evokes a real pendant light, and uses our Unicorn pHAT board with 32 programmable RGB Neopixel LEDs. Set it to a single colour, have it fade through all the colours of the rainbow, or harness the built-in wireless LAN on the Pi Zero W. It'll take around 30 minutes to assemble everything** (check out our assembly guide for details).


Mood Light uses our popular Unicorn pHAT board, with 32 programmable RGB Neopixel LEDs, giving you a veritable rainbow full of colour possibilities. The stand cleverly mounts the Pi Zero W and Unicorn pHAT at just the right angle to cast the light through the pendant light cutout and diffuse it beautifully.


The built-in wireless LAN on the Pi Zero W opens up a wealth of opportunities: connect it to your Twitter feed and track the mood of your recent tweets, or fade through the sunset and sunrise colours once you've pulled the daily sunset/sunrise times from your favourite weather server.


Note that this is a soldering project.


Features

  • 8x4 matrix of programmable RGB Neopixel LEDs

  • 3-layer white and yellow pendant light stand and diffuser

  • Pi Zero W with single core CPU and built-in wireless LAN and Bluetooth

  • Adaptor kit

  • 50cm USB A to micro-B cable (power your Pi from an existing charger or computer)

  • Python library

  • Female and male headers require soldering



Technical Details

Dimensions 145mm x 90mm x 40mm
Weight G.W 290g    
Battery Exclude

Part List

Clear frosted front layer 1
Yellow lamp fitting insert 1
White middle layer 1
White back layer 1
White leg retainers 2
White legs with rubber feet attached 2
M3 white nylon bolts and nuts 6
M2.5 white nylon bolts and nuts 4
Pi Zero W 1
Unicorn pHAT with 32 programmable RGB Neopixel LEDs 1
Male and female 2x20 pin headers 1
White and yellow pendant light stand and diffuser 1
50cm USB A to micro-B cable 1
USB A (female) to micro B (male) adaptor 1
Mini to full-size HDMI adaptor 1
Sticker sheet (personalise your Mood Light!) 1
Comes in a reusable kit box 1