新網站功能測試中,非最終報價且無法下單,敬請見諒!

Raspberry Pi PoE HAT

Raspberry Pi PoE HAT

貨號 113990575
售價 1,020.95 (未稅)
含營業稅 1,072
廠商庫存 0

原始網址: https://www.seeedstudio.com/Raspberry-Pi-PoE-HAT-p-3115.html

描述

Raspberry Pi 以太網供電 HAT 是 Raspberry Pi 計算機的一個小配件。它只能與Raspberry Pi 3 Model B + 一起使用 。 PoE HAT 允許您使用以太網供電網絡為 Raspberry Pi 供電;對於要使用的產品,它所連接的網絡需要安裝供電設備。


特徵:

  • 802.3af PoE

  • 完全隔離的開關電源

  • 37-57V DC,2 類設備

  • 5V / 2.5A DC 輸出

  • 25mm x 25mm 無刷風扇,用於處理器冷卻

  • 風扇控制


需要其他硬件

  • Raspberry Pi 3 型號 B +

  • 以太網電纜

  • 用於 802.3af 以太網供電網絡的供電設備

合規

Raspberry Pi PoE HAT 經過了廣泛的合規性測試,符合以下歐洲標準:

  • 電磁兼容指令(EMC)2014/30 / EU

  • 限制有害物質(RoHS)指令 2011/65 / EU

有關所有合規證書和編號,請訪問 www.raspberrypi.org/compliance。


警告

這個產品:

  • 只能使用符合 802.3af 標準的供電設備供電; Raspberry Pi 使用的任何外部電源應符合適用於預期用途的相關法規和標準

  • 應在通風良好的環境中操作,不應覆蓋

  • 在使用時應放置在穩定,平坦,不導電的表面上,不應與導電物品接觸


安全使用說明
為避免 Raspberry Pi 產品出現故障或損壞,請遵循以下建議:

  • 請勿阻塞或阻擋風扇

  • 任何時候都不要在風扇中插入任何東西

  • 請勿將本產品暴露在水或潮濕的環境中,並且在操作時不要將其放在導電錶面上

  • 不要將其從任何來源暴露在高溫下;該產品設計用於在正常室溫下可靠運行

  • 處理時要小心,以避免對印刷電路板和連接器造成機械或電氣損壞

  • 在連接電源插座時,避免處理 Raspberry Pi;只能通過邊緣處理,以最大限度地降低靜電放電損壞的風險

  • 與 Raspberry Pi 一起使用的所有其他外圍設備應符合使用國家的相關標準,並進行相應標記,以確保滿足安全和性能要求;這些外圍設備包括但不限於與 Raspberry Pi 結合使用的鍵盤,顯示器和鼠標




技術細節

外形尺寸 65 毫米 x 56.50 毫米 x 20 毫米
重量 GW 70g
電池排除

零件清單

Raspberry Pi PoE HAT 1

ECCN / HTS

ECCN 5A991.b

Description

The Raspberry Pi Power over Ethernet HAT is a small accessory for the Raspberry Pi computer. It can only be used with the Raspberry Pi 3 Model B+ . The PoE HAT allows you to power your Raspberry Pi using Power over Ethernet–enabled networks; for this product to be used, the network it is connected to needs to have power-sourcing equipment installed.


Features:

  • 802.3af PoE

  • Fully isolated switched-mode power supply

  • 37–57V DC, Class 2 device

  • 5V/2.5A DC output

  • 25mm x 25mm brushless fan for processor cooling

  • Fan control


Other hardware needed

  • A Raspberry Pi 3 Model B+

  • An Ethernet cable

  • Power-sourcing equipment for a 802.3af Power over Ethernet network

Compliance

The Raspberry Pi PoE HAT has undergone extensive compliance testing, and meets the following European standards:

  • Electromagnetic Compatibility Directive (EMC) 2014/30/EU

  • Restriction of Hazardous Substances (RoHS) Directive 2011/65/EU

For all compliance certificates and numbers, please visit www.raspberrypi.org/compliance.


Warnings

This product:

  • Shall only be powered using 802.3af-compliant power sourcing equipment; any external power supply used with the Raspberry Pi shall comply with relevant regulations and standards applicable in the country of intended use

  • Should be operated in a well-ventilated environment, and should not be covered

  • Should be placed on a stable, flat, non-conductive surface while in use, and should not be contacted by conductive items


Instructions for safe use
To avoid malfunction or damage to your Raspberry Pi product, please observe the following advice:

  • Do not block or obstruct the fan

  • Do not insert anything into the fan at any time

  • Do not expose the product to water or moisture, and do not place it on a conductive surface whilst it is in operation

  • Do not expose it to heat from any source; the product is designed for reliable operation at normal room temperatures

  • Take care whilst handling to avoid mechanical or electrical damage to the printed circuit board and connectors

  • Avoid handling the Raspberry Pi while it is connected to a power outlet; only handle by the edges to minimize the risk of electrostatic discharge damage

  • All other peripherals used with the Raspberry Pi should comply with relevant standards for the country of use and be marked accordingly to ensure that safety and performance requirements are met; these peripherals include, but are not limited to, keyboards, monitors, and mice used in conjunction with the Raspberry Pi

 



Technical Details

Dimensions 65mm x 56.50mm x 20mm
Weight G.W 70g    
Battery Exclude

Part List

Raspberry Pi PoE HAT 1

ECCN/HTS

ECCN 5A991.b