新網站功能測試中,非最終報價且無法下單,敬請見諒!

Pixel v2.5 製造商套件

Pixel v2.5 maker kit

貨號 110060094
售價 2,377.70 (未稅)
含營業稅 2,496.59
廠商庫存 30

原始網址: https://www.seeedstudio.com/Pixel-v2.5-maker-kit-p-2451.html

描述

用 PIXEL Board 控制您的 Android,PC,Mac,Linux,Raspberry Pi 或 BeagleBone Black LED 矩陣。只需幾分鐘即可輕鬆使用 PIXEL 免費應用程序並發送圖像,GIF 動畫,滾動文本,Twitter 提要以及您自己的像素藝術作品,無需焊接或編碼!作為額外的獎勵,為 Kickstarter 項目委託的 180 多幅原始像素藝術作品也包含在內。

PIXEL 有兩種模式:獨立模式和交互模式。在獨立模式下,使用您的設備將 GIF 動畫寫入 PIXEL 本地 microSD 卡。設備斷開連接後,GIF 將繼續播放並循環播放。在交互模式下,將 PIXEL 視為輔助顯示屏,根據 PIXEL 應用程序的邏輯執行某些操作,這些應用程序也可以 使用 PIXEL 5 傳感器端口(2 個模擬和 3 個數字) 包含 外部傳感器輸入 。要開發您自己的 PIXEL 應用程序,您需要熟悉 Android 和 / 或 Java 編程,並使用 PIXEL SDK 和示例代碼。

 

特徵

您可以為 32x32 LED 面板提供自己的 5V 電源(建議使用最低 4A)。有關說明,請參閱本指南,並指出該 指南 是指 32x32 LED 矩陣面板。當您首次運行 PIXEL 應用程序時,需要更改 LED 矩陣以鍵入您正在使用的那個(32x16,32x32,64x32 或 64x64)。

PIXEL:LED ART 項目頁面 上還有更多信息

 

零件清單

  • 1 x Pixel 2.5 PCBA

  • 1 個電源線

  • 1 個 A 到 A USB 2.0 電纜

  • 1 個 MicroSD 卡

  • 1 個 Blurtooth CSR4.0 USB Dongle

  • 1 x 像素扁平電纜

  • 1 個 FPC IDC 電纜

 

有關技術支持和建議,請訪問我們的 論壇。


技術細節

外形尺寸 170 毫米 x 120 毫米 x 40 毫米
重量 GW 156g
電池 排除

Description

Create LED art installations and wearables using low cost, HUB75 based LED panels. PIXEL supports installations from 32x16, 32x32, 64x32, and 64x64 resolutions. Simply download PIXEL’s free apps for iOS, Android, or Raspberry Pi  and  send GIF animations, scrolling text, and your own pixel art creations in seconds, no soldering or coding required! As an added bonus, the free apps include 100+ works of original pixel art commissioned for this project.




The PIXEL:LED ART board includes an onboard microSD card allowing you to save your LED art designs locally which will loop indefinitely on the LEDs after your device has been Bluetooth disconnected. Or leave your Android or Raspberry Pi connected and custom code an interactive application displaying art or scrolling messages using our open source example code including support for external sensors (external sensors only supported on Android only firmware).


The PIXEL Maker’s Kit comes installed with the Android only firmware by default supporting LED panels from 32x16 to 64x64 and can easily be flashed via the onboard microSD card for iOS and wearable support too. Refer here for firmware upgrade instructions and note that only PIXEL 2.5 boards purchased after February 2018 have a firmware that can be upgraded via the onboard microSD card.


Firmware             Android App          

iOS App    

Raspberry Pi 

Support           

Grove Sensors  

Low Power 

for Wearables          

Hub75 LED Panel Support     
Android Only             Yes             No           Yes             Yes             No           

32×16, 32×32,

64×32, 64×64             

iOS/Android 

32×16            

Yes             Yes             Yes             No             Yes             32×16 Only           

iOS/Android 

32×32            

Yes             Yes             Yes             No             Yes             32×16 Only            


Pixel v2.5 maker kit.png


After writing an animation or scrolling text to PIXEL’s onboard microSD card, your LED design will continue to play and loop after your device has been disconnected. Use PIXEL’s Raspberry Pi integration to create a dynamic installation like displaying different animations based on the weather for example.

 

The Android only firmware also supports Seeed Grove sensors, specifically 2 analog and 3 digital IO ports. For example, trigger certain animations when someone is near using a proximity sensor. To develop your own app for PIXEL, you'll need to be familiar with Android and/or Java programming and use the PIXEL SDK and sample code

 

See the PIXEL Maker’s Kit page for a list of tested and supported HUB75 LED matrix panels and power supply options. This kit does not include an LED matrix panel or power supply/battery. Your choice of power supply will depend on the number of LED Matrix panels in your installation. 


For technical support and suggestions, please visit our forum.

Also more information and instructions available at http://ledpixelart.com/maker including links to supported HUB75 LED matrix panels and power supply options.



Technical Details

Dimensions 170mm x 120mm x 40mm
Weight G.W 156g    
Battery Exclude
HUB75 LED Matrix Panel Not Included

Part List

Pixel 2.5 PCBA 1
Power Cable 1
A to A USB 2.0 Cable 1
MicroSD Card 1
Blurtooth CSR4.0 USB Dongle 1
Pixel Flat Cable
FPC IDC Cable