新網站功能測試中,非最終報價且無法下單,敬請見諒!

Booster-B36V2A5(有刷直流電機控制器和雙 H 橋)

Booster-B36V2A5(Brushed DC Motor Controller&Dual H-bridge )

貨號 105990026
售價 2,005.08 (未稅)
含營業稅 2,105.33
廠商庫存 0

原始網址: https://www.seeedstudio.com/Booster-B36V2A5%28Brushed-DC-Motor-Controller%26Dual-H-bridge-%29-p-2260.html

描述

嚴格來說,Booster-B36V2A5 是一款雙 H 橋電源驅動器,它集成了 2×4 N 溝道 MOSFET(具有低漏源導通電阻,RDS(ON)<1.6mΩ)和各種保護(可靠和靈活) 。它可以用於控制有刷直流電機,大功率 LED 等。此外,它還將 RS485 和 I2C 集成到一個連接器中,並且它們共享相同的用戶寄存器,因此可以隨時通過兩個接口中的任何一個使用。所有功能都可以通過讀寫用戶寄存器來執行,除了一些特殊操作(詳細請參考相應的通信協議),這與 MCU 操作類似。

特徵:

  • 它集成了各種保護(欠壓,過壓,過溫,過流,失控和功率反轉)。過流保護的響應時間可以由硬件(比較器)靈活設置和執行,這使得保護更加及時和可靠。
  • 有 18 種控制模式適用於不同的應用(見下文)。
  • 它集成了一個穩定和高效率的 RS485,波特率可以自動檢測。當波特率不高於 28800bps 時沒有指令丟包,否則第一個指令報文將被丟棄。此外,建議當波特率高於 28800bps 時首先發送同步字節(0xff 0xff 0xff 0xff)。
  • 它集成了一個穩定的高效率 I2C。

規範:

電源電壓:DC 6〜36V
持續電流 :2 * 5A / 1 * 10A(僅限 D-Sub 連接器,2 * 15A / 1 * 20A 用於 Mosfet 和採樣電阻。)
波特率範圍:1200〜115200bps
I2C 速度:100KHz
尺寸:54.5mm * 50mm * 30.5mm(長*寬*高)

我們有適用於該控制器的適配器: GDA-HLB1GDA-HLU1GDD-FAN

欲了解更多信息,請點擊此處下載。

訪問此處以獲取 Gicren 產品的更新文檔

技術支持: gicren(at)outlook.com


技術細節

重量 GW 70g
電池排除

Description

Strictly speaking, Booster-B36V2A5 is a dual H-bridge power driver, which integrates 2*4 N-Channel MOSFETs(with low Drain-Source On-Resistance, RDS(ON)<1.6mΩ) and various protections(reliable and flexible). It can be used for controlling the brushed DC motor, high-power LED and so on. In addition, it integrates RS485 and I2C into one connector, and they share the same user register, so it can be used via any one of the two interfaces at any time. All functions can be performed by reading or writing the user register, except for a few special operations(please refer to the corresponding communication protocols for details), which is similar to the MCU operation.
 

Features:

  • It integrates various protections(Under-Voltage, Over-Voltage, Over-Temperature, Over-Current, Out-Of-Control and Power-Reverse). The response-time of the Over-Current protection can be flexibly set and performed by hardware(comparator), which makes the protection more timely and reliable.
  • There are 18 control modes for different applications(see below).
  • It integrates a stable and high-efficiency RS485, and the baud rate can be detected automatically. There is no instruction packet loss when the baud rate is not higher than 28800bps, otherwise the first instruction packet will be discarded. Furthermore, it is recommended to send the sync bytes(0xff 0xff 0xff 0xff) first when the baud rate is higher than 28800bps.
  • It integrates a stable and high-efficiency I2C.

Specification:

Supply Voltage : DC 6 ~ 36V
Continuous Current: 2 * 5A / 1 * 10A (Just limited by D-Sub connector, 2*15A / 1*20A for mosfets and sampling resistors.)
Baudrate Range : 1200 ~ 115200bps
I2C Speed : 100KHz
Size : 54.5mm * 50mm * 30.5mm (L*W*H)

We have adapters for this controller:GDA-HLB1GDA-HLU1 and   GDD-FAN.

For more information,please click here to download.

Visit here for updated documents of Gicren’s products

Technical support:gicren(at)outlook.com

 


Technical Details

Weight G.W 70g    
Battery Exclude