新網站功能測試中,非最終報價且無法下單,敬請見諒!

Grove - Solid State Relay V2

Grove - Solid State Relay V2

貨號 103020137
售價 609.71 (未稅)
含營業稅 640.20
廠商庫存 0

原始網址: https://www.seeedstudio.com/Grove---Solid-State-Relay-V2-p-3128.html

Description

Instead of using coil, packaged solid-state relays(SSR) use power semiconductor devices such as thyristors and transistors, which provide a much faster switching speed than the mechanical relays. The Grove - Solid State Relay V2 is based on the high-quality G3MC202P module, which allows you to use a 5VDC to control MAX. 240VAC. With the help of Grove interface, it becomes very convenient to use the SSR with your arduino.


According to different application scenarios, we have prepared a series of solid state relays for you:


Grove - Solid State Relay V2

Grove - 2-Channel Solid State Relay

Grove - 4-Channel Solid State Relay

Grove - 8-Channel Solid State Relay


1535461902750059.png Due to the leakage current, we do not recommend you to use this relay with low power consumption applications.


Features


  • Advantages over mechanical relays:

      1-Solid-state relays have much faster switching speeds compared with electromechanical relays, and have no physical contacts to wear out.

      2-Totally silent operation.

      3-No physical contacts means no sparking, allows it to be used in explosive environments, where it is critical that no spark is generated during switching.

      4-Increased lifetime, even if it is activated many times, as there are no moving parts to wear and no contacts to pit or build up carbon.

      5-Compact, thin-profile SSR of monoblock construction with an all-in-one lead frame incorporates a PCB, terminals and heat sink, which is much smaller than mechanical relays, and can integrate more channels.


  • Disadvantages:

       1-When closed, higher resistance (generating heat), and increased electrical noise.

       2-When open, lower resistance, and reverse leakage current.

       3-Only works for AC laod.



Typical Applications


  • Operations that require low-latency switching, e.g. stage light control.

  • Devices that require high stability, e.g. medical devices, traffic signals.

  • Situations that require explosion-proof, anticorrosion, moisture-proof, e.g. coal, chemical industries.


Pin Map




Technical Details

Dimensions 40mm x 20mm x 25mm
Weight G.W 131g    
Battery Exclude
Operating Input Voltage 4~6V
Rated Input Voltage 5V
Load Voltage Range 75 to 264 VAC 50/60 Hz
Rated Load Voltage 100 to 240 VAC 50/60 Hz
Load Current 0.1 to 2 A
Leakage Current 1.5 mA max. (at 200 VAC)
Insulation Resistance 1,000 MΩ min. (at 500 VDC)
Operating Temperature -30°C to 80°C (with no icing or condensation)
Operating Humidity 45% to 85%RH

Part List

Grove - Solid State Relay V2 1
Grove Cable 1
A set of Acrylic Shell 1

ECCN/HTS

ECCN EAR99