新網站功能測試中,非最終報價且無法下單,敬請見諒!

Dragino V2 - 物聯網傳感器節點

Dragino V2 - IoT Sensor Node

貨號 102990002
售價 1,841.40 (未稅)
含營業稅 1,933.47
廠商庫存 0

原始網址: https://www.seeedstudio.com/Dragino-V2---IoT-Sensor-Node-p-1630.html

描述

Dragino MS14-P 是第二代 Dragino 母板 。它可以讓你將 Linux 嵌入到你的 MCU 項目中。這是一款低成本,開放式的微控制器 Linux 硬件主板。它運行開源的 Linux 系統,具有 USB 主機端口,並具有完整的以太網和 802.11 b / g / n WiFi 功能。

Dragino MS14-P 的目標是解決連接問題,並極大地增強諸如 Arduino 等微控制器產品。

Dragino MS14-P 支持通用的 OpenWrt linux 版本或修改的 OpenWrt 版本,如 Arduino Yun。

MS14 的應用包括遙控機器人,數據記錄,用於數據顯示的網絡應用程序,WiFi 等網狀網絡等。

#1:電源輸入,DC 5V 或 9〜15V

#2:兩個以太網端口 WAN 和 LAN

#3:可編程 PUSH 按鈕

#4:GPIO,SPI,I2C,SLIC,UART,LED,COLD_RESET,3.3v / 5v / raw_vcc

#5:傳感器 I / O,在 ms14-p 上不可用

#6:USB 主機

#7:JTAG 和 GPIO

#8:處理器,MIPS 24K,400Mhz

#9:LED(WiFi,WAN,LAN,SYS,Heart Beat,PWR)

#10:主天線,芯片天線或外部天線

#11:分集天線

特徵

  • OpenWrt Inside。 OpenWrt 是嵌入式系統的可靠 Linux 發行版。它是開源的,在良好的開發和維護下。 OpenWrt 使用的包系統,許多強大的實用工具,軟件以包的形式維護。用戶可以輕鬆安裝,刪除這些軟件包以製作深度定制的系統。

  • 打開硬件設計。開發人員有可能改進或在硬件上進行創新,並根據需求發布新的 / 獨特的產品。

  • 低功耗。工作模式下功耗約 1 瓦。

  • AP,客戶端或網狀模式 Wi-Fi。可以在不同的 Wi-Fi 模式下配置各種應用程序。 AP 模式:正如 Wi-Fi 路由器所做的一樣,所以其他 Wi-Fi 客戶端可以連接到 MS14 並共享其互聯網連接。客戶端模式:正如一台普通 PC 連接到您現有的 Wi-Fi 路由器以連接互聯網。 Ad-Hoc 用於網狀網絡。

  • 穩定,靈活的 Wi-Fi 設計。可以在不同的 Wi-Fi 模式下配置各種應用程序。 AP 模式:正如 Wi-Fi 路由器所做的一樣,所以其他 Wi-Fi 客戶端可以連接到 MS14 並共享其互聯網連接。客戶端模式:正如一台普通 PC 連接到您現有的 Wi-Fi 路由器以連接互聯網。 Ad-Hoc 用於網狀網絡。

  • 模塊化設計。最複雜和最困難的零件是作為母板建造的。開發人員只關注 MCU 子板設計。這有助於減少開發時間,成本,風險,難以發布新產品以測試 / 搶占市場。

  • 生產外殼。 MS14 具有可直接用於市場的專業 / 工業外殼。

  • 通過 Web GUI,SSH 或串行進行管理。內置的 Web 服務器提供了方便的使用 / 配置 / 升級 / 監控或通過 SSH / 串行完全控制。

  • 各種固件升級方法。固件可以通過串口,SSH 訪問,GUI 界面進行升級,方便維護。

  • 安全模式。強大的軟件 / 硬件接口可降低售後支持成本。

  • 遠程升級 AVR 女兒登船。子板可以遠程升級以降低維護成本並提供中央管理 / 部署。

  • 與 Arduino Yun 軟件兼容。重新使用 Arduino Yun 的所有資源來加速開發。

 

產品規格

  • 硬件系統

  1. FLASH:16MB

  2. DDR RAM:64MB

  3. CPU:AR9331

  • 接口

    1. 電源輸入:9〜12v DC 或 5v DC

    2. 10M / 100M RJ45 接口

  • WiFi Spec

    1. 協議:802.11 b / g / n

    2. 頻率:2,412 - 2,472 GHz

    3. 功率:100mW

     

    包括

    • Dragino v2 母板

    • NEMA 1-15 型電源適配器

     

    文件


    技術細節

    外形尺寸 210mm x 100mm x 50mm
    重量 GW 260g
    電池排除

    Description

    Dragino MS14-P is the 2nd generation Dragino mother board. It lets you embed Linux into your MCU projects. It is a low cost, open hardware Linux motherboard for micro-controllers. It runs open source linux system, has USB host port and has full Ethernet and 802.11 b/g/n WiFi capabilities.

    The goal of the Dragino MS14-P is to solve the connectivity problem and greatly enhance micro-controller products such as the Arduino. 

    Dragino MS14-P support generic OpenWrt linux version or modified OpenWrt version such as Arduino Yun.

    Applications for MS14 include remote control of robots, data logging, web applications for data presentation, mesh networking over WiFi and many more.

     

     

    #1: Power input, DC 5V or 9 ~ 15V

    #2: Two Ethernet ports WAN and LAN

    #3: Programmable PUSH button

    #4: GPIOs, SPI, I2C, SLIC, UART, LED, COLD_RESET, 3.3v/5v/raw_vcc

    #5: Sensors I/O, Not available on ms14-p

    #6: USB host

    #7: JTAG and GPIOs

    #8: Processor, MIPS 24K, 400Mhz

    #9: LEDs(WiFi, WAN, LAN, SYS, Heart Beat, PWR)

    #10: Main antenna, chip antenna or external antenna

    #11: Diversity antenna

     

    Features

    • OpenWrt Inside. OpenWrt is a reliable Linux distribution for embedded system. It is open source, under well developed and maintained. OpenWrt used package system, lots of powerful utility, software are maintained as packages form. Users can easily install, remove these packages to make a deep customized system. 

    • Open Hardware Design. Developers have the possibility to improve or do innovation on the hardware and release a new /unique product base on requirement. 

    • Low Power Consumption. Around 1 watt power consumption in working mode.

    • AP, Client or Mesh mode WiFi. Can be configured in different WiFi mode for various applications. AP mode: as what a normal WiFi routers does, so other WiFi client can connect to MS14 and share its internet connection. Client mode: as what a normal PC does to connect to your existent WiFi router for internet connection. Ad-Hoc for mesh network. 

    • Stable, Flexible WiFi Design. Can be configured in different WiFi mode for various applications. AP mode: as what a normal WiFi routers does, so other WiFi client can connect to MS14 and share its internet connection. Client mode: as what a normal PC does to connect to your existent WiFi router for internet connection. Ad-Hoc for mesh network. 

    • Modular Design. The most complicate and difficulty parts are built as mother board. Developers focus on the MCU daughter board design only. This helps to reduce the development time, cost, risk, difficulty to release a new product to test/seize the market. 

    • Production Enclosure. MS14 has a Professional/Industrial enclosure which can be used directly for the market. 

    • Managed by Web GUI, SSH or Serial. Built-in Web server provides convenient to use/configure/upgrade/monitor or have full control by SSH/Serial.

    • Various firmware upgrade methods. Firmware can be upgraded via serial port, SSH access, GUI interface for easy maintaining. 

    • Safe Mode. Robust software/hardware interface to reduce after-sale support cost. 

    • Remote upgrade AVR daughter aboard. Daughter board can be upgraded remotely to reduce the maintaining cost and provide central management/ deployment.

    • Compatible with Arduino Yun software. Reuse all the source from Arduino Yun to speed up development. 

     

    Specifications

    • Hardware System

    1. FLASH: 16MB

    2. DDR RAM: 64MB

    3. CPU: AR9331

  • Interface

    1. Power input: 9 ~ 12v DC or 5v DC

    2. 10M/100M RJ45 interface

  • WiFi Spec

    1. Protocol: 802.11 b/g/n

    2. Frequency: 2,412 - 2,472 GHz

    3. Power: 100mW

     

    Includes

    • Dragino v2 mother board 

    • NEMA 1-15 type power supply adapter

     

    Documents


    Technical Details

    Dimensions 210mm x 100mm x 50mm
    Weight G.W 260g    
    Battery Exclude