新網站功能測試中,非最終報價且無法下單,敬請見諒!

樹莓派計算模塊 3

Raspberry Pi Compute Module 3

貨號 102110097
售價 1,432.20 (未稅)
含營業稅 1,503.81
廠商庫存 0

原始網址: https://www.seeedstudio.com/Raspberry-Pi-Compute-Module-3-p-2848.html

描述

計算模塊是一款更加靈活的樹莓派,適用於工業應用。 CM3 是原始計算模塊的基於樹莓派 3 的修訂版本。

計算模塊包含樹莓派 3(BCM2837 處理器和 1GB RAM)以及 4GB eMMC 閃存設備(相當於 Pi 中的 SD 卡)的膽量。由於其四核 CPU,Pi 3 的處理器速度為 1.2GHz,運行速度約為 Pi 1 的 10 倍。這些都集成到一塊 67.6mm x 31mm 的小型電路板上,該電路板可裝入標準​​DDR2 SODIMM 連接器(與用於筆記本電腦內存的連接器類型相同)。閃存直接連接到電路板上的處理器,但其餘處理器接口可通過連接器引腳提供給用戶。您可以充分享受 BCM2837 SoC 的靈活性(這意味著與 Raspberry Pi 相比,可以使用更多的 GPIO 和接口),將模塊設計為自定義系統應該相對簡單明了,因為我們已經將所有棘手的位模塊本身。

計算模塊可以單個單元購買,也可以批量購買數百或數千個。要開始設計 PCB 使用的模塊,我們提供了一個開源的接口板,在負擔得起的單個模塊的開發套件

計算模塊 3 的精簡版也可用。該 CM3L   將 SD 卡接口帶到模塊引腳,這樣用戶就可以將它連接到他們選擇的 eMMC 或 SD 卡上。

Features.jpg

計算模塊 3 包含 200 引腳 SODIMM 設計中包含的以下組件:

•Broadcom BCM2837 處理器

•1Gbyte LPDDR2 RAM

•4Gbytes eMMC Flash

•35u 硬鍍金 IO 引腳

Specification.jpg

•ARMv7 指令集

•成熟和穩定的 Linux 軟件堆棧

  • - 最新的 Linux 內核支持

  • - 許多司機都成功了

  • - 穩定和良好的用戶環境支持

  • - 使用標準 API 完全實現 GPU 功能


技術細節

外形尺寸 30 毫米 x 70 毫米 x 10 毫米
重量 GW 60g
電池排除

零件清單

樹莓派計算模塊 3 1

Description

The Compute Module is a Raspberry Pi in a more flexible form factor, intended for industrial application. CM3 is the Raspberry Pi 3-based revision of the original Compute Module.

The Compute Module contains the guts of a Raspberry Pi 3 (the BCM2837 processor and 1GB RAM) as well as a 4GB eMMC Flash device (which is the equivalent of the SD card in the Pi). The Pi 3 has a processor speed of 1.2GHz and runs at roughly 10 times the speed of the Pi 1 due to its quad-core CPU. This is all integrated on to a small 67.6mm x 31mm board which fits into a standard DDR2 SODIMM connector (the same type of connector as used for laptop memory). The Flash memory is connected directly to the processor on the board, but the remaining processor interfaces are available to the user via the connector pins. You get the full flexibility of the BCM2837 SoC (which means that many more GPIOs and interfaces are available as compared to the Raspberry Pi), and designing the Module into a custom system should be relatively straightforward as we’ve put all the tricky bits onto the Module itself.

The Compute Module is available for purchase in single units, or in batches of hundreds or thousands. To get started designing a PCB to use the Module, we provide an open-source breakout board with a single Module in an affordable development kit.

A lite version of the Compute Module 3 is also available. The CM3L brings the SD card interface to the Module pins so a user can wire this up to an eMMC or SD card of their choice.

Features.jpg

The Compute Module 3 contains the following components contained within a 200 pin SODIMM design:

•Broadcom BCM2837 processor

•1Gbyte LPDDR2 RAM

•4Gbytes eMMC Flash

•35u hard gold plated IO Pins

Specification.jpg

•ARMv7 Instruction Set

•Mature and stable Linux software stack

  • - Latest Linux Kernel support

  • - Many drivers upstreamed

  • - Stable and well support user environment

  • - Full availability of GPU functions using standard APIs



Technical Details

Dimensions 30mm x 70mm x 10mm
Weight G.W 60g    
Battery Exclude

Part List

Raspberry Pi Compute Module 3 1